Liquid Force Kites 2013
Liquid Force Kites FEATURES
Liquid Force Kites MAX FLOW INFLATION SYSTEM ONE PUMP.
The future is now, and this future is inflated quicker and easier by the Liquid Force Kites Max Flow Valve. Imagine a kite that inflates in 40% less time, getting you to the water faster and leaving your friends still pumping on the beach.The Liquid Force Kites Max Flow valve can bring it, and only the full range of Liquid Force kites has it! This new one way high airflow valve mixed with our completely redesigned, gauge-equipped pump will change your life. Once you go Max Flow, you never go back!
Liquid Force Kites CPR CONTROL SYSTEM EQUIPPED 100% DEPOWER – CENTER LINE PUSH RELEASE
The Liquid Force Kites CPR release allows riders an instant and effortless safety release of the kite, with either hand, from the front or back of the bar, to either the 100% de-power flag line or 90% de-power mainline leash options.
Liquid Force Kites SUPERIOR QUALITY CANOPY MATERIAL TEIJIN RIPSTOP T9600
When most of the kiteboarding brands out there stopped using this very high end material due to cost increases, we at Liquid Force Kites stood our ground! We strongly believe that the use of Teijn Ripstop T9600 is essential to high quality kite design. Your kite will repeatedly perform like the day it was pulled out of the plastic and hold a much higher resale value.
Liquid Force Kites BOMB PROOF CONSTRUCTION GLUED AND STITCHED PANEL ASSEMBLY
The entire panel layout of Liquid Force Kites is glued and stitched using an overlapped seam assembly. This construction has proven throughout the years to be the strongest on the market. Liquid Force Kites have also discovered the perfect Dacron reinforcement to weight ratio to ensure the highest quality for your investment. Our signature molded EVA leading edge bumpers are light, strong and will protect your LE during self-launch, hard crashes, snow re-launch, and normal everyday wear and tear.
Liquid Force Kites WINGTIPS, UNIQUE LF DIAMOND WINGTIP DESIGN
While most other kite designs on the market only use round wingtips, at Liquid Force Kites we believe in our unique Diamond Wingtip design. The Diamond wingtip not only provides huge de-power and easier prelaunch over traditional curved wingtips, but provides a rigid structure as well as instant and predictable kite response. The Liquid Force Kites Diamond Wingtip also provides smooth, constant pull and power through turns while still effectively de-powering the kite when needed.Bomb Proof Construction, Glue and Stiched Panel Assembly
Liquid Force Kites REINFORCED LEADING EDGE STRUCTURE DOUBLE LAYER LE CONSTRUCTION
When crashing at full power, no other part of the kite absorbs as much impact as the leading edge, specifically the center of the leading edge. Our center leading edge segments are beefed up by doubling the amount of Dacron used in production, but only where it’s truly needed. This will not increase the weight of the LE but will give your kite the ability to hit the water hard all day, worry free.
Liquid Force Kites STRUTS ANGLED JET STRUT ENDS DESIGN
Our angled Jet Struts prevent any of the bridles from getting stuck at the end of the strut during intensive water prelaunch. Reliability is the word!
Liquid Force Kites BRIDLES SYSTEM USB 2.0. – ULTRA STABLE BRIDLE
A reliable bridle is a primary focus of kite design at Liquid Force. The LF USB 2.0 Bridle is a Proven Liquid Force cascade SLE bridle system with one static wingtip pulley. Instant depower, re-launch and stability is the #1 goal.